No Rinse Floor Cleaner Concentrate 1Litre, Each - Enzyme Wizard

Features

DIRECTIONS:
How to Use:
1. Dilute the product at a ratio of 100:1
2. Measure out 100ml and pour into 10L bucket of water
3. If one fills 10L bucket half full, use: 50ml
4. Make sure to use new mop head to avoid streaking.
5. Wet mop head as you normally would.
6. When squeezing out mop head, leave mop head wet.
7. Mop floor as you usually would, leaving a thin layer of solution - this will allow the enzymes to work at their best.

DO NOT MIX WITH OTHER CLEANING PRODUCTS OR CHEMICALS

Important Information:
• Ensure that when changing over to the No Rinse floor cleaner use a new mop and bucket.
• When mixing the concentrate into the bucket make sure you use the correct ratio of 100:1 – if you fill the bucket half full then adjust concentrate
accordingly.
• One can use either a string mop or a flat head micro fiber mop. Better results are achieved with a flat head micro fiber mop.
• When first starting with No Rinse Floor Cleaner, one can either high pressure wash floor and then start mopping or one can just start with mopping the floor straight away. With standard mopping, results will occur after a day or two
• After mopping, rinse mop and stand mop upright in cupboard. Enzymes will carry on working and stop the mop from smelling.
• Do not mix No Rinse floor cleaner with other chemicals as this will deactivate the enzymes.

STORAGE: Store at room temperatures.

TECHNICAL DATA:
pH Neutral
Bio-degradable
Non-Flammable
Non-Corrosive
Non-Caustic

Video

Video on Enzyme Wizard No Rinse Floor Cleaner:

Product Enquiry

Contact Details

Request More Information

Details of the product above will be automatically included with your enquiry.

Associated Items